Oil & Gas Site Enclosure Cooling
Weatherproof, closed-loop cooling for automation panels, compressor station controls and pipeline SCADA enclosures on the Front Range and in the DJ Basin.
Protect automation at remote pads
Well-site automation, measurement and communications equipment sits in outdoor enclosures on exposed pads, often hours from the nearest technician in bad weather. Heat, dust and moisture shorten electronics life and cause costly downtime.
PrecisionAir units seal the enclosure, cool it with a closed air loop and report status remotely through the ACG7 controller. BBCOND installs and services units for operators, midstream companies and automation integrators.
Call 303-219-1000, email sales@bbcond.com or request a quote.
Oil and gas applications
- Well-site automation panels: PLCs, RTUs and flow computers
- Compressor station controls: MCCs, VFDs and control rooms
- Pipeline SCADA and telemetry: remote terminal units and radios
- Measurement and metering enclosures: custody transfer and analyzer electronics
- Tank battery controls: level, safety and communications equipment
- Field offices and data trailers: network and server enclosures
Why Dantherm PrecisionAir
- Closed-loop cooling: outside air never mixes with enclosure air, keeping dust, moisture and smoke out
- Rated -40°F to 131°F: built-in heaters (500–2,000 W) for Colorado winters, full capacity in summer heat
- NEMA 3R construction: galvanized steel standard, stainless steel optional, all-aluminum microchannel coil
- Efficient, quiet operation: high-static BCI fans, rated by Dantherm at 40–60% less energy; 60–65 dB
- Remote monitoring: optional ACG7 controller with Ethernet, SNMP v2 or Modbus and a web interface
- Listed and tested: UL or ETL listings by model; manufactured under ISO 9001
Sizes and power options
- PrecisionAir 2000: about 2,200–2,500 BTU/h, 115 or 230 VAC
- PrecisionAir 4000 / 6000: about 4,000–6,000 BTU/h, 115, 230 or 460 VAC three-phase, or 48 VDC
- PrecisionAir 10000 / 12000 / 14000: about 10,000–14,000 BTU/h; 10000 and 12000 in 208/230 VAC or 48 VDC, 14000 and 14000 mid-mount in 48 VDC
- PrecisionAir 20000: about 20,000 BTU/h, 208/230 VAC
- PrecisionAir 24000 / 28000: about 24,000–28,000 BTU/h; 24000 in 208/230 VAC or 48 VDC, 28000 in 48 VDC
Options include an Ethernet controller, stainless steel housing and beige, white or custom finishes. BBCOND sizes each unit from your equipment heat load and site conditions.
Serving sites within an hour of Denver
We support sites within about an hour of Denver, including Weld County areas around Fort Lupton, Brighton, Hudson and Erie, and the eastern plains. Contact us about sites farther out.
See all enclosure and shelter cooling applications, or related pages: Telecom Shelter Air Conditioning in Denver, Remote Server Station Cooling in Colorado, Battery Energy Storage (BESS) Cooling in Colorado.
Frequently asked questions
-
Are units suitable for classified hazardous locations?
Standard PrecisionAir units carry UL or ETL listings for general use. Tell us the area classification and we will confirm suitability before quoting.
-
Can the units run on solar or battery DC power?
48 VDC models are available in several sizes.
-
How do you reduce site visits?
Closed-loop units need less filter maintenance, and the ACG7 controller can send alarms over your network.