Outdoor Walk-In Cooler Site Planning in Lakewood and Golden, CO

An outdoor permanent walk-in cooler or freezer can free up valuable floor space inside a building, add storage capacity without a remodel, and give a growing operation room to expand. In Lakewood and Golden, where many commercial properties sit along the foothills with limited interior square footage, outdoor walk-in coolers are often the most practical way to add cold storage. But an outdoor walk-in is a construction project, not an appliance delivery. The site, the pad, the power and the refrigeration layout all need to be planned before the first panel arrives. This guide walks through what Lakewood and Golden business owners and facility managers should think about when planning a new outdoor walk-in.

Who uses outdoor walk-ins in Lakewood and Golden

Outdoor walk-ins make sense for almost any operation that has outgrown its indoor cold storage but has usable space on the lot. Along the west side of the metro, common projects include:

  • Breweries, distilleries and taprooms that need keg and finished-product storage next to production space.
  • Food producers and commissaries adding capacity for ingredients and packaged goods.
  • Event venues and catering operations that need overflow storage for large events.
  • Schools, campuses and institutional kitchens where interior space is fully committed.
  • Food banks and nonprofits that receive large donations of perishable product.

Step one: the site survey

Every successful outdoor walk-in starts with a careful look at the site. A good site survey answers practical questions before design begins:

  • Location and access. Where will the box sit relative to the kitchen, production area or loading dock? Staff will walk that path many times a day, often in winter weather.
  • Drainage and grade. Sloped lots are common near the foothills. Water needs to drain away from the box, not toward the door.
  • Setbacks and easements. Property lines, utility easements, fire lanes and parking requirements can limit where a structure is allowed.
  • Overhead hazards. Roof edges that shed snow and ice, trees and overhead lines all affect placement of the box and its condensing unit.
  • Delivery and crane access. Panels and refrigeration equipment need a clear route onto the site.

Zoning, building, electrical, mechanical and health requirements vary between the City of Lakewood, the City of Golden and unincorporated Jefferson County. Confirm current permit and code requirements for your specific property and business type before construction begins.

Designing for Colorado weather

The Front Range foothills put an outdoor walk-in through a lot. Heavy spring snowstorms, summer hail, strong downslope winds and big swings between day and night temperatures are all part of a normal year. A new outdoor box should be designed for those conditions from the start:

  • A proper concrete pad. The pad should be level, sized for the box and designed with drainage in mind. Freezers also need floor insulation and protection from ground freezing beneath the slab.
  • A weatherproof roof. Outdoor walk-ins need a roof system rated for the snow load at the site and sloped to shed water and snow.
  • Durable exterior finishes. Exterior panel skins and roofing should stand up to hail, UV exposure at altitude and freeze-thaw cycles.
  • Door placement. Doors should face away from prevailing wind and drifting snow where possible, with a clear, safe landing.

BBCOND builds outdoor walk-ins with Crown Tonka modular insulated panels, available for indoor and outdoor coolers, freezers and combination units in custom sizes, paired with Heatcraft refrigeration systems.

Power, refrigeration and start-up

Once the box location is set, the next decisions are about the refrigeration system and the utilities that serve it.

  • Remote or self-contained. A remote system places the condensing unit on a pad, wall or roof with refrigeration piping running to the evaporator inside the box. A self-contained or top-mount system packages the refrigeration on the box itself. Site conditions, noise, snow exposure and service access all factor into the choice.
  • Condensing unit placement. Outdoor units need airflow, clearance from drifting snow and roof runoff, and protection from hail and physical damage.
  • Altitude. Lakewood and Golden sit well above sea level, and equipment selection should account for actual site conditions rather than a standard catalog assumption.
  • Electrical service. The building panel needs capacity for the new equipment, and the circuit routing should be planned with the electrician early.
  • Controls and monitoring. Electronic controls, temperature monitoring and alarms help owners catch problems before product is at risk.

The project wraps up with refrigeration start-up, temperature pull-down, a walkthrough with the owner and any required inspections. Energy-efficient features such as LED lighting, quality door gaskets, strip curtains and EC fan motors are worth building in from day one. Walk-in equipment is also subject to federal efficiency standards and refrigerant transition rules, so new systems should be selected to meet current requirements.

Why a new-build specialist matters for outdoor walk-ins

Many Colorado refrigeration companies are built around repair and service calls. BBCOND is built around new construction. Since 2015, our focus has been designing, supplying and installing new walk-in cooler and freezer boxes, outdoor permanent walk-ins and large refrigeration infrastructure replacements for supermarkets and big-box retail. We do not offer repair or service work, so our crews and project management are organized around planned projects with a defined scope, schedule and finish.

For an outdoor walk-in, that means one team coordinating the site survey, pad requirements, box design, refrigeration layout and start-up, instead of piecing a project together from separate vendors. Learn more about our new-build commercial refrigeration services in Colorado, or see how we approach outdoor walk-in coolers in Commerce City and Broomfield. After installation, the owner or their chosen service provider handles routine care such as keeping coils clear, clearing snow from around the condensing unit and checking door gaskets.

Frequently asked questions

Do I need a permit for an outdoor walk-in in Lakewood or Golden?

In most cases, an outdoor walk-in involves building, electrical and mechanical work that requires permits, and zoning may also apply. Requirements differ between Lakewood, Golden and unincorporated Jefferson County, so confirm current rules with your local building department before construction.

Can an outdoor walk-in be a combination cooler and freezer?

Yes. Modular panels can be configured as a combination unit with a cooler section and a freezer section sharing a wall, each with its own refrigeration system and temperature controls.

How long does an outdoor walk-in project take?

Timelines depend on permits, pad work, equipment lead times and weather. Starting the planning early, ideally well before you need the storage, gives the project room to move smoothly through each phase.

Should I replace an old outdoor walk-in or keep it?

If an existing outdoor box has damaged panels, a failing roof, a cracked or heaved floor or aging refrigeration equipment, a new box built for current needs is usually the more predictable long-term choice.

Plan your outdoor walk-in in Lakewood or Golden

If your business is short on cold storage and has room outside, BBCOND can help you plan a new custom outdoor walk-in cooler or freezer built for Colorado weather. Call 303-219-1000, email sales@bbcond.com, or request a free on-site consultation and estimate.

Contact Us

Tell us about your project and we’ll get back to you.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.