Water & Wastewater Panel Cooling
Weatherproof, closed-loop cooling for lift station controls, SCADA and telemetry enclosures, and treatment plant equipment around Denver.
Keep pumps and telemetry online
Lift stations, booster stations and remote metering sites rely on outdoor control panels that sit in direct sun and harsh weather. When the PLC, radio or drive inside overheats, a station can stop reporting or stop pumping.
PrecisionAir units are sealed against the dust, moisture and corrosive air common at water and wastewater sites, and optional stainless steel housings add durability. BBCOND installs and services cooling for municipalities, special districts and their integrators.
Call 303-219-1000, email sales@bbcond.com or request a quote.
Water and wastewater equipment
- Lift and pump station control panels: PLCs, starters and drives
- SCADA and telemetry enclosures: radios, RTUs and communications
- Booster and pressure stations: distribution system controls
- Treatment plant electrical rooms: MCCs and process control enclosures
- Metering and flow monitoring sites: remote instrumentation cabinets
- Stormwater and irrigation controls: outdoor control cabinets
Why Dantherm PrecisionAir
- Closed-loop cooling: outside air never mixes with enclosure air, keeping dust, moisture and smoke out
- Rated -40°F to 131°F: built-in heaters (500–2,000 W) for Colorado winters, full capacity in summer heat
- NEMA 3R construction: galvanized steel standard, stainless steel optional, all-aluminum microchannel coil
- Efficient, quiet operation: high-static BCI fans, rated by Dantherm at 40–60% less energy; 60–65 dB
- Remote monitoring: optional ACG7 controller with Ethernet, SNMP v2 or Modbus and a web interface
- Listed and tested: UL or ETL listings by model; manufactured under ISO 9001
Sizes and power options
- PrecisionAir 2000: about 2,200–2,500 BTU/h, 115 or 230 VAC
- PrecisionAir 4000 / 6000: about 4,000–6,000 BTU/h, 115, 230 or 460 VAC three-phase, or 48 VDC
- PrecisionAir 10000 / 12000 / 14000: about 10,000–14,000 BTU/h; 10000 and 12000 in 208/230 VAC or 48 VDC, 14000 and 14000 mid-mount in 48 VDC
- PrecisionAir 20000: about 20,000 BTU/h, 208/230 VAC
- PrecisionAir 24000 / 28000: about 24,000–28,000 BTU/h; 24000 in 208/230 VAC or 48 VDC, 28000 in 48 VDC
Options include an Ethernet controller, stainless steel housing and beige, white or custom finishes. BBCOND sizes each unit from your equipment heat load and site conditions.
Serving sites within an hour of Denver
We support cities, water and sanitation districts and integrators within about an hour of Denver, including Aurora, Thornton, Westminster, Arvada, Brighton, Parker, Castle Rock and Littleton.
See all enclosure and shelter cooling applications, or related pages: Traffic Signal & ITS Cabinet Cooling in Denver, Government & Military Equipment Cooling in Colorado, Oil & Gas Site Enclosure Cooling in Colorado.
Frequently asked questions
-
Does the unit keep hydrogen sulfide and moisture out?
The closed-loop design keeps outside air separate from the enclosure air, which helps protect electronics from moisture and airborne contaminants.
-
Can the controller report to our SCADA system?
Yes. The optional ACG7 controller supports Modbus and SNMP v2 over Ethernet.
-
What if the panel is in a confined or hazardous location?
Tell us about the site classification. We will confirm whether a standard unit is appropriate before quoting.