Islandaire PTAC Replacement Guide

Matching a New PTAC to Your Existing Sleeve
Replacing a PTAC is far simpler when the new unit fits the existing wall sleeve. Islandaire publishes a replacement guide that matches original units from many manufacturers, by sleeve height and width, to a specific EZ Series replacement. If a unit is not on the list, Islandaire states that it can custom design one.
BBCOND uses this guide to identify the right Islandaire model for your building, order it and complete the installation, whether you are replacing one unit or an entire building’s worth.
To identify your replacement model, contact BBCOND with the make and model of your current unit, or call 646-470-7041.
Example Replacements
- Suburban Dynaline gas PTAC: 16 x 42 inch sleeve; replaced by the EZ Series GS.
- Amana PTH/PTC 42-inch, GE Zoneline Deluxe, LG LP, Trane PTEE/PTHE: 16 x 42 inch sleeves; replaced by the EZ Series 42.
- McQuay K, EK and RK Series: 13 15/16 x 36 inch sleeve; replaced by the EZ Series KF.
- Friedrich Vert-I-Pak, Amana VTC/VTH, GE Vertical: 23 x 23 inch vertical units; replaced by the EZ Series VP.
- Ice-Air RSK Series: 16 x 36 inch sleeve; replaced by the EZ Series RK.
- Fedders, Remington, Singer, Slant-Fin, Zoneaire and more: Dozens of other legacy models have listed EZ Series equivalents.


Planning Notes
For shipping and handling, Islandaire advises assuming a one-piece chassis weighs about 150 pounds and a two-piece chassis about 200 pounds. Sleeve dimensions above are from the manufacturer’s guide; BBCOND verifies measurements on site before ordering.
BBCOND also participates in government high-efficiency programs that replace old PTAC units in residential buildings. Ask our team to check current program terms for your property.

Our expertise
Frequently asked questions
-
How do I find the right Islandaire replacement?
Locate the make and model of your existing unit and its sleeve size. BBCOND matches it to the corresponding EZ Series model.
-
What if my unit is not on the list?
Islandaire states it can custom design a unit for sleeves not covered by its standard models.
-
How heavy is a replacement PTAC?
Plan on roughly 150 pounds for a one-piece chassis and 200 pounds for a two-piece chassis.



